% \iffalse meta-comment
%
% Copyright (c) 2006-2007, Lars Kotthoff <lars@larsko.org>
%
% Large portions copied from pdftex,
% Copyright (c) 2001-3, Radhakrishnan CV <cvr@river-valley.com>
%                       Rajagopal CV <cvr3@river-valley.com>
%                       http://www.river-valley.com
%
% River Valley Technologies, Floor III, SJP Buildings, Cotton Hills
% Trivandrum, India 695014
%
% Tel: +91 471 233 7501
%
%                     Antoine Chambert-Loir 
%                     <chambert@math.polytechnique.fr>
%                     http://www.math.polytechnique.fr/~chambert
%
% Ecole polytechnique, Palaiseau Cedex, France
%
% This program is free software; you can redistribute it and/or
% modify it under the terms of the GNU General Public License
% as published by the Free Software Foundation; either version 2
% of the License, or (at your option) any later version.
%
% This program is distributed in the hope that it will be useful,
% but WITHOUT ANY WARRANTY; without even the implied warranty of
% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
% GNU General Public License for more details.
% 
% You should have received a copy of the GNU General Public License
% along with this program (gpl.txt); if not, write to the Free
% Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
% MA  02111-1307, USA.
%
% \fi
%
% \iffalse
%<*driver>
\ProvidesFile{gnuplottex.dtx}
%</driver>
%<package> \NeedsTeXFormat{LaTeX2e}[1999/12/01]
%<package> \ProvidesPackage{gnuplottex}
%<*package>
    [2007/10/13 v0.4.2 gnuplot graphs in LaTeX]
\RequirePackage{latexsym,graphicx,moreverb,keyval,ifthen}
%</package>
%
%<*driver>
\documentclass{ltxdoc}
\usepackage{gnuplottex}
\EnableCrossrefs
\CodelineIndex
\RecordChanges
\begin{document}
    \DocInput{gnuplottex.dtx}
    \PrintChanges
    \PrintIndex
\end{document}
%</driver>                                                       
% \fi
%
% \CheckSum{238}                                                   
%
% \CharacterTable                                                
%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%   Digits        \0\1\2\3\4\5\6\7\8\9
%   Exclamation   \!     Double quote  \"     Hash (number) \#
%   Dollar        \$     Percent       \%     Ampersand     \&
%   Acute accent  \'     Left paren    \(     Right paren   \)
%   Asterisk      \*     Plus          \+     Comma         \,
%   Minus         \-     Point         \.     Solidus       \/
%   Colon         \:     Semicolon     \;     Less than     \<
%   Equals        \=     Greater than  \>     Question mark \?
%   Commercial at \@     Left bracket  \[     Backslash     \\
%   Right bracket \]     Circumflex    \^     Underscore    \_
%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%   Right brace   \}     Tilde         \~}
%
%
% \changes{v0.1}{2006/04/02}{Initial version.}
% \changes{v0.2}{2006/10/28}{Changed gnuplot output to LaTeX, simplified code.}
% \changes{v0.3}{2007/08/21}{Improved MikTeX compatibility.}
% \changes{v0.4}{2007/09/28}{Added feature to specify gnuplot terminal.}
% \changes{v0.4.1}{2007/10/06}{Improved gnuplot terminal handling.}
% \changes{v0.4.2}{2007/10/13}{Added terminaloptions option.}
%
% \GetFileInfo{gnuplottex.dtx}
%
% \DoNotIndex{\the,\year,\month,\day,\time}
%
% \title{The \textsf{gnuplottex} package\thanks{This document
%   corresponds to \textsf{gnuplottex}~\fileversion, dated \filedate.}}
% \author{Lars Kotthof\/f\\ \texttt{lars@larsko.org}}
%
% \maketitle
%
% \section{Introduction}
%
% This package allows you to include gnuplot graphs in your \LaTeX{} documents.
%
% The gnuplot code is extracted from the document and written to
% \texttt{.gnuplot} files. Then, if shell escape is used, the graph files are
% automatically processed to graphics or \LaTeX{} code files which will then be
% included in the document.
% If shell escape isn't used, the user will have to manually convert
% the files by running gnuplot on the extracted \texttt{.gnuplot} files.
%
% Shell escape is available in the web2c \TeX{} compiler, it allows the execution
% of shell code during the compilation of a \TeX{} document. It's disabled by
% default, you'll have to edit your configuration files or give the
% \texttt{-shell-escape} option to \texttt{latex}.
%
% \section{Requirements}
%
% To use gnuplottex, you'll need the \texttt{graphicx}, \texttt{latexsym},
% \texttt{keyval}, \texttt{ifthen}, and \texttt{moreverb} packages and, of
% course, gnuplot.
%
% \section{Usage}
%
% To load the package, simply \verb=\usepackage{gnuplottex}= in your document
% preamble. Options that can be passed to the package are
% \begin{description}
%     \item[\oarg{shell}] Use shell escape to automatically generate the graphs
%     from the gnuplot source files. This is the default. Normally, you don't
%     need to specify this option.
%     \item[\oarg{noshell}] Don't use shell escape, graphs must be generated
%     manually.
%     \item[\oarg{miktex}] We're using mikTeX.
% \end{description}
%
% The following environments can be used to include graphs:
%
% \DescribeEnv{gnuplot}
% Within this environment, you can specify arbitrary gnuplot code, for example\\
% \texttt{plot sin(x)}.\\
% The code necessary to write the plot to a file will be inserted by this
% package. It adds 'set terminal \meta{terminal}' and the name of the output file.
% The terminal can be specified by the user and defaults to \texttt{latex}. It may
% be set to anything supported by gnuplot. If set to a terminal which produces
% \TeX{} output, such as latex, tex, epslatex, or pstricks, the file processed
% by gnuplot will be included with the \verb=\include= command, else the
% \verb=\includegraphics= command is used. The file extension of the
% intermediate file is in some cases different from the terminal name, this is
% taken care of for most common terminals in the package code. If graphics
% inclusion fails for a specific terminal, the intermediate file extension may
% be the cause.
%
% The terminal name can be specified as
% a value to the key \texttt{terminal} as an argument to the environment,\\
% \verb=\begin{gnuplot}=[terminal=\meta{terminal}]\\
% \ldots\\
% \verb=\end{gnuplot}=
%
% The graph can be scaled by providing an argument to the \texttt{scale} key,
% similar to the specification of the terminal name. It defaults to 1, i.e.\ no
% scaling will be done. Additional options to the terminal can be given as
% argument to the \texttt{terminaloptions} key, e.g.\\
% \verb=\begin{gnuplot}=[terminal=pdf,terminaloptions=fsize 12 linewidth 2]\\
% \ldots\\
% \verb=\end{gnuplot}=
%
% \section{Acknowledgements}
%
% Thanks to Roy Ratcliffe for the suggestion and basic code for the gnuplot
% terminal specification and handling.
% I would also like to thank all the people who sent me bug reports and feature
% requests. Gnuplottex wouldn't be what it is today without you.
%
% \StopEventually{}
%
% \section{Implementation}
%
% \subsection{Initialization}
%    \begin{macrocode}
\newif\ifShellEscape
\newif\ifmiktex \miktexfalse

\DeclareOption{shell}{\ShellEscapetrue}
\DeclareOption{noshell}{\ShellEscapefalse}
\DeclareOption{miktex}{\global\miktextrue}

\ExecuteOptions{shell}
\ProcessOptions\relax
%% test if shell escape really works
\ifShellEscape
		\def\tmpfile{/tmp/w18-test-\the\year\the\month\the\day\the\time}
		\ifmiktex
				\def\tmpfile{w18-test-\the\year\the\month\the\day\the\time}
				\immediate\write18{echo t > "\tmpfile"}
		\else
				\immediate\write18{touch \tmpfile}
		\fi
		\ifmiktex
				\IfFileExists{\tmpfile.}{\ShellEscapetrue}{\ShellEscapefalse}
				\immediate\write18{del "\tmpfile"}
		\else
				\IfFileExists{\tmpfile}{\ShellEscapetrue}{\ShellEscapefalse}
				\immediate\write18{rm -f \tmpfile}
		\fi
\fi

\ifShellEscape
    \PackageInfo{gnuplottex}
    {Automatically converting gnuplot files.}
\else
    \PackageWarningNoLine{gnuplottex}
        {Shell escape not enabled.\MessageBreak
        You'll need to convert the graphs yourself.}
\fi
\newcounter{fignum}
%    \end{macrocode}
%
% \subsection{\texttt{.gnuplot} write out}
%    \begin{macrocode}
\def\figname{\jobname-gnuplottex-fig\thefignum}

\def\gnuplotverbatimwrite#1{%
    \def\BeforeStream
    {\message{Opening gnuplot stream #1}%
        \immediate\write\verbatim@out{\string set terminal \gnuplotterminal \gnuplotterminaloptions}
				\immediate\write\verbatim@out{\string set output '\figname.\gnuplottexextension{\gnuplotterminal}'}
    }
    \@bsphack
    \immediate\openout \verbatim@out #1
    \BeforeStream%
    \let\do\@makeother\dospecials
    \catcode`\^^M\active
    \def\verbatim@processline{%
        \immediate\write\verbatim@out
        {\the\verbatim@line}}%
    \verbatim@start}
\def\endgnuplotverbatimwrite{%
    \immediate\closeout\verbatim@out
    \@esphack
		\catcode`\\0
		\catcode`\{1
		\catcode`\}2
		\catcode`\$3
		\catcode`\&4
		\catcode`\^^M5
		\catcode`\#6
		\catcode`\^7
		\catcode`\_8
		\catcode`\ 10
		\catcode`\%14}
%    \end{macrocode}
% 
% \subsection{Environment definition}
%    \begin{macrocode}
\def\gnuplottexextension@latex{\string tex}
\def\gnuplottexextension@epslatex{\string tex}
\def\gnuplottexextension@eepic{\string tex}
\def\gnuplottexextension@pstricks{\string tex}
\def\gnuplottexextension@pslatex{\string tex}
\def\gnuplottexextension@pstex{\string tex}
\def\gnuplottexextension@emtex{\string tex}
\def\gnuplottexextension@jpeg{\string jpg}
\def\gnuplottexextension#1{\@ifundefined{gnuplottexextension@#1}{#1}{\csname gnuplottexextension@#1\endcsname}}
\define@key{pic}{scale}[1]{\def\gnuplotscale{#1}}
\define@key{pic}{terminal}[latex]{\def\gnuplotterminal{#1}}
\define@key{pic}{terminaloptions}{\def\gnuplotterminaloptions{ #1}}
\newenvironment{gnuplot}[1][]{\stepcounter{fignum}%
		\def\gnuplotterminal{latex}
		\def\gnuplotterminaloptions{}
		\def\gnuplotscale{1}
		\setkeys{pic}{#1}
    \xdef\gnuplotCutFile{\figname.gnuplot}
    \gnuplotverbatimwrite{\gnuplotCutFile}}
    {\endgnuplotverbatimwrite%
    \gnuplotgraphicsprocess%
    \gnuplotgraphicsinclude}
%    \end{macrocode}
%
% \subsection{\texttt{.gnuplot} file processing}
%    \begin{macrocode}
\def\extension{\gnuplottexextension{\gnuplotterminal}}
\long\gdef\gnuplotgraphicsprocess{%
		\ifShellEscape
				\IfFileExists{\figname.gnuplot}{%
						\immediate\write18{gnuplot \figname.gnuplot}
						\IfFileExists{\figname.\extension}{%
								\PackageInfo{gnuplottex}{\figname.gnuplot converted}}
						{\PackageWarningNoLine{gnuplottex}
								{Conversion of \figname.gnuplot failed}}}{}
		\fi}
%    \end{macrocode}
%
% \subsection{Graph inclusion}
%    \begin{macrocode}
\long\gdef\gnuplotgraphicsinclude{%
		\IfFileExists{\figname.\extension}{%
				\ifthenelse{\equal{\extension}{\string tex}}
						{\scalebox{\gnuplotscale}{\input{\figname.\extension}}}
						{\includegraphics[scale=\gnuplotscale]{\figname.\extension}}
		}
		{\PackageWarningNoLine{gnuplottex}
				{Please convert \figname.gnuplot manually}}
}
%    \end{macrocode}
%
% \Finale
\endinput
